Table of Contents
Advertisement
206
4-5. Using the driving support systems
WARNING
In some situations, while the
●
pre-collision braking function is
operating, operation of the function
may be canceled if the accelerator
pedal is depressed strongly or the
steering wheel is turned and the
system determines that the driver is
taking evasive action.
If the brake pedal is being
●
depressed, the system may deter-
mine that the driver is taking eva-
sive action and possibly delay the
operation timing of the pre-collision
braking function.
■
When to disable the pre-colli-
sion system
In the following situations, disable the
system, as it may not operate prop-
erly, possibly leading to an accident
resulting in death or serious injury:
●
When the vehicle is being towed
When your vehicle is towing
●
another vehicle
When transporting the vehicle via
●
truck, boat, train or similar means of
transportation
When the vehicle is raised on a lift
●
with the hybrid system on and the
tires are allowed to rotate freely
●
When inspecting the vehicle using
a drum tester such as a chassis
dynamometer or speedometer
tester, or when using an on vehicle
wheel balancer
●
When a strong impact is applied to
the front bumper or front grille, due
to an accident or other reasons
If the vehicle cannot be driven in a
●
stable manner, such as when the
vehicle has been in an accident or
is malfunctioning
●
When the vehicle is driven in a
sporty manner or off-road
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
When the tires are not properly
●
inflated
When the tires are very worn
●
●
When tires of a size other than
specified are installed
When tire chains are installed
●
●
When a compact spare tire or an
emergency tire puncture repair kit is
used
If equipment (snow plow, etc.) that
●
may obstruct the radar sensor or
front camera is temporarily installed
to the vehicle
Changing settings of the
pre-collision system
■
Enabling/disabling the pre-col-
lision system
The pre-collision system can be
enabled/disabled on
of the multi-information display.
The system is automatically enabled
each time the power switch is turned to
ON.
If the system is disabled, the PCS
warning light will turn on and a
message will be displayed on the
multi-information display.
(P.467)
Advertisement
Table of Contents
