Table of Contents
Advertisement
252
4-5. Using the driving support systems
System components
Meter control switches
Turning the Blind Spot Monitor on/off.
Outside rear view mirror indica-
tors
When a vehicle is detected in a blind
spot of the outside rear view mirrors or
approaching rapidly from behind into a
blind spot, the outside rear view mirror
indicator on the detected side will illumi-
nate. If the turn signal lever is operated
toward the detected side, the outside
rear view mirror indicator flashes.
BSM indicator
■
Certification
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
Illuminates when the Blind Spot Monitor
is enabled
■
Outside rear view mirror indicator
visibility
In strong sunlight, the outside rear view
mirror indicator may be difficult to see.
■
When "Blind Spot Monitor Unavail-
able" is shown on the multi-infor-
mation display
Ice, snow, mud, etc., may be attached to
the rear bumper around the sensors.
(P.253) The system should return to
normal operation after removing the ice,
snow, mud, etc. from the rear bumper.
Additionally, the sensors may not oper-
ate normally when driving in extremely
hot or cold environments.
■
When "Blind Spot Monitor Malfunc-
tion Visit Your Dealer" is shown on
the multi-information display
There may be a sensor malfunction of
misaligned. Have the vehicle inspected
by your Toyota dealer.
■
Customization
Some functions can be customized.
(P.462)
Advertisement
Table of Contents
