Using Automatic Mode (Air Conditioning) - Toyota Corolla Hybrid 2020 Owner's Manual

328
6-1. Using the air conditioning system and defogger
delayed for a short period of time
immediately after the air conditioning
system is started in automatic mode.
Except for GCC countries
●
parking, the system automatically
switches to outside air mode to
encourage better air circulation
throughout the vehicle, helping to
reduce odors that occur when starting
the vehicle.
*
: Saudi Arabia, Sultanate of Oman,
Bahrain, United Arab Emirates, Qatar,
Kuwait
■
Air conditioning filter
P.383
■
Customization
Some functions can be customized.
(P.462)
WARNING
■
To prevent the windshield from
fogging up
Do not use the windshield defogger
switch during cool air operation in
extremely humid weather. The differ-
ence between the temperature of the
outside air and that of the windshield
can cause the outer surface of the
windshield to fog up, blocking your
vision.
NOTICE
■
To prevent 12-volt battery dis-
charge
Do not leave the air conditioning sys-
tem on longer than necessary when
the hybrid system is off.
Using automatic mode
1
Press the automatic mode
switch.
2
Adjust the temperature setting.
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
3
To stop the operation, press the
off switch.
If the fan speed setting or air flow
*
: When
modes are operated, the automatic
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
■
Using automatic mode
Fan speed is adjusted automatically
according to the temperature setting and
the ambient conditions.
Therefore, the fan may stop for a while
until warm or cool air is ready to flow
immediately after the automatic mode
switch pressed.
Adjusting the temperature
for the driver and front pas-
senger seat separately
(vehicles with DUAL mode
air conditioning system)
To turn on the "DUAL" mode, per-
form any of the following proce-
dures:
 Press the "DUAL" switch.
 Adjust the front passenger's side
temperature setting.
The indicator on the "DUAL" switch
comes on when the "DUAL" mode is
on.
Pressing the "DUAL" switch when in
"DUAL" mode will disable "DUAL"
mode, and the temperature setting for
the front passenger's side will become
linked to the driver's side.