Overview; Usage; Location; Grounding - Graco XM Series Operation

Overview

Overview

Usage

XM plural-component sprayers can mix and spray most
two-component epoxy and urethane protective coatings.
When using quick-setting materials (less than 10 minute
pot life) a remote mix manifold must be used.
XM plural-component sprayers are operated via the
user interface, air controls, and fluid controls.
12

Location

XM sprayers are not approved for use in hazardous
locations unless the base model, all accessories, all
kits, and all wiring meet local, state, and national
codes. See Important Isocyanate (ISO)
Information, page 8, to determine the appropriate
location for your particular sprayer model.

Grounding

Connect the XM sprayer ground wire clamp (FG) to a
true earth ground. If wall power is used to power
controls or heaters, ground electrical connection
properly according to local codes.
FG
312359M