User Interface - Graco XM Series Operation

Component Identification

User Interface

DJ
DR
F . 6: User Interface
IG
Buttons
Call
out Button Function
DA Display Use to view Ratio, Mode Selection, Error
Screen Conditions, Totalizers, System
Information.
DB Start Initiates Active Run Mode function
currently selected in Run Screen.
DC Stop Terminates Active Run Mode function
currently selected.
DD Enter Press to open drop-down fields,
selection options, and save values.
DE Alarm Resets alarms and advisories.
Reset
DF Left/Right Move between screens in run or setup
modes.
DG Function Activates mode or action represented by
the icon above each of the four buttons
in the LCD.
DH Up/Down Move between selection boxes,
drop-down fields, and selectable values
within Setup screens.
DJ Setup Change ratio or enter Setup mode.
Key Lock
DR USB Port Connection for data download. Use only
in non-hazardous locations.
18
DA
DG
DF
DD
DM
DB
DK
LEDs
There are four types of LEDs on the display.
Call
out LED
DK Blue
DM Green
DN Red
DP Yellow
ti13365a
DN
DC
Function
Dosing valve active
-
on - dosing valve is active
-
off - dosing valve is not active
Spray mode active
-
spray mode is on (active)
-
spray mode is off (inactive)
Alarm
-
on - alarm is present
-
off - no alarm
Warning
-
on - is active.
-
off - no warning indicated. Ratio
and setup fields are not
changeable.
-
flashing - key is present and
turned. Ratio and setup fields
are changeable.
DH
DE
DP
312359M