Set Sprayer Limits (Optional) - Graco XM Series Operation

Set Sprayer Limits (Optional)

For details regarding the limits setup screens, see User
Limits Setup Screens, page 60.
To set and adjust pump pressure limits and temperature
limits:
1. Select in the Enable Setup 2 screen. See
Enable Setup Screens, page 58, for instructions.
2. From the Home Setup screen press
to the limits screens.
3. Follow the instructions in Set Pressure Limits and
Set Temperature Limits.
Set Pressure Limits
Use the following instructions to set pressure limits for
each pump that if met will issue an advisory and/or
warning.
To set pressure limits, press
through each field, and press
selectable. Press
pressure digit, and press
through the optional values. Continue this process until
you reach the desired pressure limit. Press
save.
The B pump pressure always runs 10-20% higher than
the A pump pressure.
312359M
to jump
and to move
to make a field
to scroll through each
and to scroll
to
Set Temperature Limits
Use the following instructions to set temperature limits
that if met will issue an advisory and/or warning.
Press to move to the temperature limits screen.
To set temperature limits, press
through each field, and press
selectable. Press
temperature digit, and press
through the optional values. Continue this process until
you reach your desired temperature limit. Press
save the value.
The allowable range for the temperature setpoint is 34° -
160°F (1° - 71°C).
Basic Operation
and to move
to make a field
to scroll through each
and to scroll
to
27