Technical Data - Graco XM Series Operation

Technical Data

XM Plural-Component Sprayers
Mixed Ratio Range
Ratio Tolerance Range (before alarm)
Fluid Viscosity Range†
Fluid filtration, standard on pump outlets*
Air Filtration
Weight
Weight: Base sprayer
(XM1A00, XM5A00 models)
Add component weights to base sprayer weight
for your specific model weight.
Dimensions
See Dimensions, page 83
Inlet/Outlet Sizes
Air inlet size
Fluid inlet size, without feed kits
Ambient temperature range
Operating
Storage
Maximum fluid working pressure of mixed material
50:1
70:1
Maximum Fluid Temperature
Air Supply Pressure Range
Maximum pump air set pressure
50:1
70:1
Maximum Pump Inlet Fluid Feed Pressure
Maximum Air Consumption at
100 psi (0.7 MPa, 7.0 bar) in scfm (m^3/min.)
Flow Rates
Minimum* *
Maximum
Notes
† Heavier viscosities can be mixed using heat, circulation, and pressure feeding.
* Filter assembly is not included on some models.
* * Minimum flow rate is dependent on material being sprayed and mixing capability. Test your material specific to flow rate.
312359M
US
1:1-10:1 (in 0.1 increments)
200-20,000 cps (heavier viscosities can be mixed using heat,
circulation, and/or pressure feeding)
60 mesh
40 micron main filter, 5 micron control air filter;
see Pump Performance Charts, page 86
742 lb
32-130 °F
30-160 °F
5200 psi
6300 psi
160 °F
50-150 psi
100 psi
90 psi
250 psi
70 scfm per gpm (1.96 m
1 quart per minute
3 gallons per minute
Metric
+/- 5%
238 micron
336.87 kg
3/4 in. npt(f)
1 1/4 npt(m)
0-54 °C
-1-71 °C
35.8 MPa, 358 bar
43.5 MPa, 435 bar
71 °C
0.35-1.0 MPa, 3.5-10.3 bar
0.68 MPa, 6.8 bar
0.62 MPa, 6.2 bar
1.7 MPa, 17 bar
3
/min. per lpm)
0.95 liters per minute
11.4 liters per minute
Technical Data
87