Set Maintenance Parameters (Optional) - Graco XM Series Operation

Basic Operation
Set Maintenance Parameters
(Optional)
Prior to configuring system settings, see Enable Setup
Screens, page 58, to ensure screens shown in this
section are viewable and configurable. If they are not,
follow instructions in Enable Setup Screens to enable
them.
For details regarding the user interface display screens
see User Interface Display, page 53.
To set maintenance parameters for pumps and valves,
including maintenance schedules, press
the Home Setup screen.
Use the first screen to set maintenance setpoint
amounts for pumps and dosing valves. Use the second
screen to set the maintenance schedule for changing
the incoming air filter.
Set Maintenance Setpoints
To set maintenance setpoint values, press
to move through each field, and press
make a field selectable. Press
each setpoint digit. Press
through the optional values. Continue this process until
the desired setpoint is reached. Press
that setpoint.
26
from
and
to
to scroll through
and to scroll
to save
Set Maintenance Schedule
To set the number of days between changing the
incoming air filter that will result in a reminder advisory,
press to move to the Maintenance Setup 2
screen. Press to make the field selectable. Press
to scroll through each digit, and press
to scroll through the optional values. Press
to save the number of days value.
and
312359M