System Overview - Graco 333013B Instructions - Parts Manual

System Overview

Typical Waterborne System Installation
F 1 shows a typical electrostatic waterborne AA spray system. It is not an actual system design. For assistance
IGURE
in designing a system to suit your particular needs, contact your Graco distributor.
F . 1 Typical Installation, Pro Auto Xp Waterborne System
IG
Item Description
A Main Air Supply Line
B* Bleed-Type Air Shutoff Valve
C Pump Air Pressure Gauge
D Pump Air Pressure Regulator
E kV Meter
F Pump
G Pump Suction Hose
H Paint Container
J* Bleed Resistor
K* Enclosure Safety Interlock
L Isolated Enclosure
M Air Line Filter
N Pneumatic connection to turbine air interlock.
(Pressurized when isolation system door is
closed)
333013B
Also refer to system pneumatic
connections in F
Item Description
R Graco Waterborne Fluid Hose
T Grounding Rod
U Ground Terminal
V* Main Ground Wire
W Strain Relief Fitting
X Pump Air Supply Line
Y Grounding Cylinder
Z Pump Fluid Outlet Fitting
AA Isolated Enclosure Door (not shown, to illustrate
internal components. Door must be closed and
locked to operate system).
BB Enclosure T-Handle Locking Screw (part of door
assembly)
* These items are required for safe operation. They are
included with the WB3000 system.
Introduction
3, page 13.
IGURE
9