Set System Settings (Optional) - Graco XM Series Operation

Set System Settings (Optional)

For details regarding the user interface display screens
see User Interface Display, page 53.
To set user interface parameters and USB parameters,
press from the Home Setup screen.
Set User Interface Parameters
Press from the potlife/hose length screen to
move to the user interface parameters screen.
The following user interface parameters are
configurable:
• date format
• date (factory set)
• time (factory set)
• units of measurement for:
- fluid flow rate
- pressure
- temperature
- hose length
- weight
To change the date format, press
Press to open the drop down field. Press
and to select the preferred format. Press
again to save that date format. Follow this procedure to
change the units of measurement formats as well.
To change the date and time, press
field. Press to make the field selectable. Press
and to scroll through each digit. Press
312359M
Press
Set USB Parameters
Press
screen to move to the USB parameters screen.
To set the sprayer number, configure the number of
hours downloaded to external USB flash drive, and how
often the data will record: press
through each field. Press
selectable. Press
to select the field.
digit. Press
in each field. Press
to select the
and to move to the next digit in the field.
to save the change.
from the user interface parameters
and
and to move to the next digit
to save the change.
Basic Operation
and to move
to make a field
to scroll through each
25