Overview; Usage; Location - Graco XM Series Operation

Plural-component sprayers

Hide thumbs Also See for XM Series:

Table of Contents

Overview

XM plural-component sprayers can mix and spray most

two-component epoxy and urethane protective coatings.

When using quick-setting materials (less than 10 minute

pot life) a remote mix manifold must be used.

The XM sprayer operates using compressed air

pressure. XM plural-component sprayers are operated

via the user interface, air controls, and fluid controls.

The hazardous location XM model variants feature an

intrinsically safe alternator powered by a compressed

air-fed turbine as a power supply. The alternator module

working pressure must be set to 18 +/- 1 psi (12.6 +/- 10

kPa, 1.26 +/- 0.07 bar).

312359R

XM sprayers are not approved for use in hazardous

locations unless the base model, all accessories, all

kits, and all wiring meet local, state, and national

codes. See Models, page 9, to determine the

appropriate location for your particular sprayer model.

Overview

Table of Contents