Pinion Gear And Driveshaft Removal - BRP Johnson J30TEL4SUA 2007 Service Manual

Use appropriate tool to push pin out of the clutch
dog shifter. Remove the clutch dog shifter from the
shaft.
Remove the push pin and the return spring from
the end of the propeller shaft.
2
1
1. Push pin
2. Return spring
Pinion Gear and
Driveshaft Removal
Remove the propeller shaft bearing housing from
the gearcase. Refer to "Propeller Shaft Bearing
Housing Removal" on page 206.
Hold the pinion nut securely with a wrench. Fit a
driveshaft holder to the end of the driveshaft and
loosen the pinion nut. Remove the pinion nut from
the gearcase.
1
001844
1. Driveshaft holder, P/N 345834
Remove two (2) bolts that secure the driveshaft
bearing housing to the gearcase.
001845
1. Bolts (2)
GEARCASE
DISASSEMBLY
001833
9
1
001834
207