Installation - BRP Johnson J30TEL4SUA 2007 Service Manual

MIDSECTION
STEERING HANDLE

Installation

Install the tiller handle bracket. Install and tighten
two (2) bolts securely.
1
1. Bolts (2)
2. Tiller handle bracket
Connect the shift lever link to the shift handle by
installing the washer and the cotter pin.
2
1. Cotter pin and washer
2. Shift lever link
Connect the emergency stop switch lead wire and
the engine start button lead wire.
1
2
1. Engine start button lead wire
2. Emergency stop switch lead wire
176
Install the tiller handle and the throttle cable
assembly.
Install the tiller handle cover. Apply Nut Lock the
the threads of two (2) bolts. Install and tighten the
bolts to a torque of 17 ft. lbs. (23 N·m).
2
2
1
001729
1. Bolts (2)
2. Tiller handle cover
Install the plate and the bolt.
To connect and adjust the throttle cables, refer to
the FUEL SYSTEM section.
1
2
001728
1
1. Locknut
2. Throttle drum
3. Blot
4. Plate
001727
001726
4
3
001725