Installation - BRP Johnson J30TEL4SUA 2007 Service Manual

Installation

Install the dowel pins, the spacers, and the starter
motor.
3
2
1
1. Starter motor
2. Spacers (2)
3. Dowel pins (2)
Install and tighten two (2) bolts to a torque of 97
in. lbs. (11 N·m).
1
1. Bolts (2)
Install the starter motor band and two (2) bolts.
Tighten the bolts to a torque of 17 ft. lbs. (23 N·m).
Install the starter motor sub cable.
2
3
1
2
1. Starter motor sub cable
2. Bolts (2)
3. Starter motor band
001708
Install the negative (–) battery cable and the bolt.
1
1
2
1. Bolt
2. Negative (–) battery cable
Install the flywheel cover and three (3) bolts.
Tighten the bolts securely.
001707
1
1. Bolts (3)
2. Flywheel cover
Connect the battery cables to the battery.
ELECTRICAL
STARTER MOTOR
2
3
001706
001705
2
001394
97
5