Service Specifications And Special Tools; Technical Data - BRP Johnson J30TEL4SUA 2007 Service Manual

SERVICE SPECIFICATIONS AND SPECIAL TOOLS

TECHNICAL DATA

TECHNICAL DATA
HP
Full Throttle
Operating Speed
Power
Idle Speed (in-gear)
Weight (without engine oil)
Lubrication
Engine Type
Displacement
Bore
Stroke
Standard Bore
Crankshaft Journal
Rod Crankpin
Valve Clearance (cold engine)
Compression Ring End Gap
Piston-to-Cylinder Bore
Clearance
Test Propeller
Carburetion
Calibration
Starting Enrichment
Carburetor Float Height
Preferred Fuel
Acceptable Fuel
Minimum Octane
Additives
16
30 HP (22.1 kw) @ 6100 RPM
Remote Models: 212 lbs. (96 kg)
TEL Models: 216 lbs. (98 kg)
For initial 10 hour break-in: Evinrude/Johnson 4-Stroke Oil, P/N 775597
After break-in: Evinrude/Johnson Ultra 4-Stroke Oil, P/N 775594
Four-stroke, three-cylinder SOHC
2.5591 to 2.5598 in. (65.000 to 60.020 mm)
To bore oversize, add piston oversize dimension to standard bore.
1.5741 to 1.5748 in. (39.982 to 40.000 mm)
1.4166 to 1.4173 in. (35.982 to 36.000 mm)
0.005 to 0.007 in. (0.13 to 0.17 mm)
Top: 0.005 to 0.011 in. (0.12 to 0.27 mm)
2nd: 0.014 to 0.020 in. (0.35 to 0.50 mm)
0.004 in. (0.10 mm) maximum
(also requires bushing, P/N 5034620, and stopper, P/N 5034621)
Three single-throat carburetor, float feed
Fixed intermediate and high speed
Remote Models: Choke solenoid
0.575 ± 0.040 in. (14.6 ± 1 mm)
Any of the above gasolines with 10% Ethanol or 5% Methanol with 5% co-solvents
2+4 Fuel Conditioner, Fuel System Cleaner, Carbon Guard
Use only BRP recommended fuel additives.
The use of other additives may result in engine damage.
30
5500-6100 RPM
900 ± 50 RPM
3
36.4 cu. in. (597 cm )
2.56 in. (65 mm)
2.36 in. (60 mm)
P/N 5032468
Adjustable low speed;
TEL Models: Manual choke
Regular unleaded
87 AKI (R+M)/2 or 90 (RON)