Lon/Mimic Display Converterk3I050; Mimic Display Card K3R071 (Supersedes K3R070) - Siemens Cerberus CS1140 Commissioning

3.4.24

LON/mimic display converterK3I050

Pos. Component
1 DIL switch S3
LON-Bus address
2 Resistor R1
LON-Bus termination (EOL)
Afterwards fit K3I050 and connect data bus, LON-Bus cable, supply cable and the periphery.
3.4.25

Mimic display card K3R071 (supersedes K3R070)

Pos. Component
1 Resistor network module
2 DIL switch S1
Databus address
Afterwards install K3R071 and connect the data bus and supply cables and the periphery
Caution!
The two centre screws
moved (risk of ground short).
Note:
On the K3R070 the printed socket num-
bers are incorrect. The numbering corre-
sponds with the stamp on the K3R071
(Õ See description of hardware, docu-
ment e1260).
Fire & Security Products
Siemens Building Technologies Group
Set as per system documentation
R1 must be removed if K3I050 is not the last
device on the LON-Bus (when wired as a
stub line)
Õ See also description of hardware
(document e1260)
Remove (on all K3R071 modules except one) Fitted
Set as per system documentation
must be re-
3
Preparation
1
2
Preparation
3
Default
address 0
100W
Default
Address 0 (Test)
1
2
21
e1249d 1
01.1999