Siemens Cerberus CS1140 Commissioning page 37

Load localization data from DZ1154 into AlgoWorks
Localization structure
Allocating devices
Fire & Security Products
Siemens Building Technologies Group
Deactivate address allocation (Õ page 93)
ÕThe data which are now localized in the control unit can be loaded with the function
Comm Õ Fast Upload Loc. –> PC in the SWE11 (Õ Page 94)
1. Start up AlgoWorks shell
2. Connect DZ1154 to the maintenance PC
3. Localization data DZ1154 Õ AlgoWorks
Õ AlgoWorks: Function CS11-Tools Õ Read AlgoMan data
Õ AlgoMan: Mem Õ send [2]
All devices localized using the AlgoMan and identified by the control unit are allocated a
localization index greater than 10,000 in the localization structure. In this way the devices
localized using the AlgoMan can be distinguished from those localized using address al-
location.
First device localized using AlgoMan = Localization index 10,001
Second device localized using AlgoMan = Localization index 10,'002
etc.
Example: Localization structure using AlgoMan
(Õ page 38)
Using Auto Link:
The devices localized using the AlgoMan can be linked with the function Auto Link. This
requires manual adjustment of the localization index counters.
Procedure:
1. Open station nodes of the physical structure with the raw node editor and the value of
the parameter next loc. index set to 10001 (field must be unlocked): Node Õ Unlock
or <Alt> + <K>).
2. Set localization indexes in the logical structure according to commissioning list or
ground plan Loc. Õ Set loc. Index or
3. Open station nodes in the physical structure, read off the value of the parameter next
loc. index and use the raw node editor to insert it in the field next loc. index of the
station node in the localization structure (field must be unlocked: Node Õ Unlock or
<Alt> + <K>).
4. Start automatic linking Loc. Õ Auto Link
33
e1249d 2
01.1999