Evac-Nl Operating Unit Fto2007-N1 [Nl]; Evac-Nl Connector Board Fti2002-N1 [Nl]; Mimic Display Driver (Evac) Ft2003-N1 [Nl] - Siemens FS20 Planning Manual

Project planning of indication and operation devices
5
EVAC-NL indicators [NL]

5.9.2 EVAC-NL operating unit FTO2007-N1 [NL]

Totaal
Alarm
Zoeme
uit
Start
Stop
IN/UIT
LED
TEST
Select
Start
Stop 2x

5.9.3 EVAC-NL connector board FTI2002-N1 [NL]

5.9.4 Mimic display driver (EVAC) FT2003-N1 [NL]

48 | 242
Building Technologies
Fire Safety
The EVAC-NL operating unit is an evacuation control unit for the Dutch market. It
enables the operation of a maximum of ten evacuation zones.
The EVAC-NL operating unit is connected to the station-internal bus.
The EVAC-NL operating unit is not individually available as an option.
The EVAC-NL connector board FTI2002-N1 is the interface card of the EVAC-NL
operating unit FTO2007-N1 for the serial RS485 module.
The EVAC-NL connector board permits remote operation of an EVAC operating
unit with ten evacuation zones and is also used with the mimic display driver
(EVAC).
The EVAC-NL mimic display driver FT2003-N1 is a remote EVAC operating unit
without LED indicator. The EVAC-NL operating unit is mounted on a connector
board that is operated via the RS485 interface.
The EVAC-NL mimic display driver is installed in a separate housing by the
operator and the LED display are arranged according to the layout plan.
008843_v_en_--
2015-12-15