Setting the Gamma Value for Remote Scans
You can set the gamma value that is used for scanning colour documents into your computer
through the Network Scan function. Select a gamma value that is most suited to your computer
settings so that you can print the document from your computer with the most optimal density.
NOTE
• [Gamma Value for Remote Scans] appears only if the optional Color UFR II/PCL/PS Printer Kit or
imagePRESS Server is available for use.
• For more information on the Network Scan function, see the Network ScanGear Guide.
1
4
2
4-60
Specifying Common Settings
➞ [Common Settings] ➞ [Gamma Value for Remote Scans].
Press
Select the gamma value ([Gamma 1.0], [Gamma 1.4], [Gamma 1.8], or
[Gamma 2.2]) ➞ press [OK].