Setting the Gamma Value for Remote Scans
You can set the gamma value that is used for scanning color documents into your computer
through the Network Scan function. Select a gamma value that is most suited to your computer
settings so that you can print the document from your computer with the most optimal density.
NOTE
• For more information on the Network Scan function, see the Color Network ScanGear User's Guide.
• The default setting is 'Gamma 1.8'.
1
Press
If necessary, see the screen shot in step 1 of
2
Press [▼] or [▲] until [Gamma Value for Remote Scans] appears ➞
press [Gamma Value for Remote Scans].
(Additional Functions) ➞ [Common Settings].
"
Initial Function at Power ON," on p. 4-15.
Specifying Common Settings
4
4-55