Wire Cleaning
If streaks appear on printed output or random parts of the printed image are missing, clean the
corona assembly wires inside the main unit.
NOTE
• It takes approximately 35 seconds to clean the wires.
• Wire cleaning cannot be performed during printing.
1
2
Roller Cleaning
If dirt or streaks appear on printed output, clean the roller inside of the main unit.
NOTE
It takes approximately one minute to clean the roller.
7
1
2
7-56
Routine Cleaning
➞ [Adjustment/Cleaning] ➞ [Wire Cleaning].
Press
Press [Start].
When cleaning is complete, try printing again.
➞ [Adjustment/Cleaning] ➞ [Roller Cleaning].
Press
Press [Start].
When cleaning is complete, try printing again.