# 099
Cause
Copying/printing was interrupted.
Remedy
Try copying/printing again.
# 701
Cause 1
The specified Department ID does not exist, or the password has changed.
Remedy
Enter the correct Department ID or password using
panel, and try again.
Cause 2
The Department ID or password was changed while the machine was processing a job, or
<Allow Printer Jobs with Unknown IDs> is set to 'Off'.
Remedy
Contact your System Manager.
# 703
Cause
The hard disk is full, and no more images can be scanned.
Remedy 1
Wait a few moments, and try scanning again after the other send jobs are complete.
Remedy 2
Erase documents stored in inboxes. If the machine still does not operate normally, turn the
main power OFF, and then back ON again. (See "Main Power and Control Panel Power," on
p. 1-18.)
#711
Cause
The inbox memory is full.
Remedy
Erase unnecessary documents stored in the inbox. (See Chapter 2, "Introduction to the Mail
Box Functions," in the Copying and Mail Box Guide, and Chapter 6, "Receiving Documents,"
in the Sending Guide.)
# 712
Cause
The maximum number of documents are already stored in the inbox.
Remedy
Erase unnecessary documents stored in the inbox. (See Chapter 2, "Introduction to the Mail
Box Functions," in the Copying and Mail Box Guide, and Chapter 6, "Receiving Documents,"
in the Sending Guide.)
-
(numeric keys) on the control
List of Error Messages
8
8-75