4
Gauge the mark on the output test print using the densitometer.
5
Press [Fine Adjust] of the colour you want to adjust.
6
Select the number ➞ enter the gauged density value of the mark of the
same number on the test print ➞ press [OK].
NOTE
The colour patterns on the test print are laid out in numeric order (1 to 7) when the cyan patterns
are on top.
7
Press [Store and Finish].
NOTE
If [Test Print] is pressed before pressing [Store and Finish], a test print with colour patterns after
adjustment is output.
Device Management Settings
6
6-81