Canon imagePRESS C1+ Reference Manual page 368

6
7
6
6-84
Device Management Settings
Select the number to adjust ➞ press [+] for the heavy density or [-] for
the light density ➞ [OK].
NOTE
The colour patterns on the test print are laid out in numeric order (-6 to 6) when the cyan patterns
are on top. The patterns under -6 and 6 may not be shown, depending on the paper width. In this
case, the numbers are from -5 to 5.
Press [Store and Finish].
The display returns to the screen of step 2. Repeat these steps until the shading is improved.
NOTE
If [Test Print] is pressed before pressing [Store and Finish], a test print with colour patterns after
adjustment is output.