Canon imagePRESS C1+ Reference Manual page 462

16
7
7-28
Paper Deck-AA1 (Optional)
IMPORTANT
If you fasten the blue screw without pressing the inner size change plate away from you, the plate
may be fixed at an angle. If you use the paper deck with a tilted inner size change plate, paper
may be fed as slanted, poor print quality may result, and paper jams may occur. Therefore, make
sure to fasten the blue screw while pressing the inner size change plate away from you.
Insert the deck base plate when using 330 mm x 483 mm, 320 mm x 450
mm (SRA3), 305 mm x 457 mm, A3, or A4 paper.
When using A4R paper, it is not required to insert the deck base plate.
When not using the deck base plate, move the paper deck away from the main unit and hang
the deck base plate on the hook that is on the left side of the paper deck.
IMPORTANT
• When using 330 mm x 483 mm, 320 mm x 450 mm (SRA3), 305 mm x 457 mm, A3, or A4 paper
without setting the deck base plate, the edge of the paper may fall and paper jam may occur. Be
sure to set the deck base plate.
• Never place the deck base plate in the empty part of the paper deck. Doing so may lead to a
malfunction of the copier.
Deck Base Plate