Canon imagePRESS C1+ Reference Manual page 459

10
Align the rear edge retainer with the marks for the desired paper size.
IMPORTANT
If the rear edge retainer is not aligned properly, paper may become jammed, the quality of the
image may be degraded, or the inside of the main unit may become dirty. Be sure to load paper
with the rear edge retainer properly aligned with the paper size marks on the top and base of the
paper deck.
11
When you have finished aligning the rear edge retainer with the marks
for the desired paper size, fix the rear edge retainer with the blue screw
using a coin or something similar.
IMPORTANT
There are two screw holes for fastening the rear edge retainer. Make sure that the rear edge
retainer is fastened properly, aligned with the marks for the desired paper size, to prevent it from
being installed at an angle.
B5
LTR
A4
Paper Deck-AA1 (Optional)
7
7-25