Canon imagePRESS C1+ Reference Manual page 413

■ How to Adjust the Image Location Using Register Marks
To adjust the image location, check whether the centre line of the register mark and the edge of the test
print paper are aligned, and adjust the image location as follows:
• If the centre line of the register mark overlaps the edge of the test print paper exactly, it is unnecessary
to adjust the image location.
• If the centre line of the register mark is outside the edge of the test print paper (the centre line of the
register mark is NOT printed), check to see which register mark's number the test print line is next to,
and input the positive value.
• If the centre line of the register mark is inside the edge of the test print, check to see which register
mark's number the test print line is next to, and input the negative value.
Centre Line of Register
Mark Is Outside the Edge
of the Test Print
Input "+4" to Adjust
Centre Line of Register
Mark and Edge of
Test Print Are Aligned
Adjusted Correctly
Registering/Editing Custom Paper Types
Centre Line of Register
Mark Is Inside the Edge
of the Test Print
Input "-6" to Adjust
6
6-129