Saddle Stitcher Unit (Optional) - Canon imagePRESS C1+ Reference Manual

NOTE
If there are no staples ready for stapling after the cover is closed, the stapler unit automatically
performs a "dry" stapling operation to reposition the staples.

Saddle Stitcher Unit (Optional)

If a staple jam occurs inside the saddle stitcher unit of the optional Saddle Finisher-AA2, a
screen similar to the one shown below appears on the touch panel display. Check the location
of the staple jam, and follow the procedure described below, and the procedure that appears on
the touch panel display, to remove any jammed staples.
IMPORTANT
If necessary, make sure to remove all of the paper in the Booklet tray before clearing a staple jam inside
the saddle stitcher unit.
1
Open the front cover of the finisher.
Clearing Staple Jams
8
8-61