Setting the Gamma Value for Remote Scans
You can set the gamma value that is used for scanning color documents into your
computer through the Network Scan function. Select a gamma value that is most
suited to your computer settings so that you can print the document from your
computer with the most optimal density.
NOTE
•
For more information on the Network Scan function, see the Color Network ScanGear
User's Guide.
•
The default setting is 'Gamma 1.8'.
1
4
2
4-58
Specifying Common Settings
(Additional Functions) ➞ [Common Settings].
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on
p. 4-17.
Press [▼] or [▲] until [Gamma Value for Remote Scans]
appears ➞ press [Gamma Value for Remote Scans].