Removing Punch Waste - Canon imagePRESS C1+ Reference Manual

8
Close the front cover of the finisher.
CAUTION
When closing the front cover of the finisher, be careful not to get your fingers caught,
as this may result in personal injury.
IMPORTANT
When you have replaced the staple cartridge, be sure to manually reposition the staples in the
saddle stitcher unit. (See "Saddle Stitch Staple Repositioning," on p. 4-70.)

Removing Punch Waste

When the punch waste tray of the optional Punch Unit-L1/N1/P1 becomes full, a screen similar
to the one shown below appears on the touch panel display. Follow the procedure described
below to remove the punch waste.
NOTE
This procedure is necessary only if the optional Punch Unit-L1/N1/P1 is attached.
Finisher-AA1/Saddle Finisher-AA2/Punch Unit-L1/N1/P1 (Optional)
7
7-39