Recovery Mode (Private Lan Only) - Honeywell AlarmNet 7810iR-ent Installation And Setup Manual

Action
7. To enter 10-digit installation key,
Enter the 10-Digit Installation Key.
Important: The installation key must
match the primary CS installation key.
8. Re-enter 10-digit installation key for
verification.
If the Installation Key entry is verified then
7810iR-ent will automatically return you to
the previous screen.

Recovery Mode (Private LAN only)

In the event that the 7810iR-ent's hardware has to be replaced, the Recovery Mode
feature can be used. Recovery Mode will force the 7810iR-ent to use the Installation Key
to recover all 7845i-ent accounts.
Action
1. Press the Recovery Mode button.
2. Enter the 10-digit Installation Key to
recover all accounts.
NOTE: See the Installation Key paragraph in
Section 1 for more information.
Screen Display
Screen Display
Section 4: Programming
4-15