Table of Contents
Advertisement
Fail to Manual
If Fail to Manual is selected and there is a loss of communication between the 7810iR-ent
and the Automation system, an incoming message will be reported as undeliverable to
AlarmNet after approximately 30 seconds. AlarmNet will then route all messages to the
secondary CS path (AlarmNet-i, AlarmNet-M or 800 PLUS).
Action
1. Loss of Automation Equipment
communication with Fail to Manual
feature selected. Operator must
manually respond to incoming alarms.
2. Loss of Automation Equipment
communication with Fail to Manual
feature NOT selected. All messages
from AlarmNet will be bounced.
AlarmNet will route all message traffic
for this CS to the Backup Account CS.
Screen Display
Section 5: Operation
5-7
Hide quick links:
Advertisement
Table of Contents
