Subscriber Commands; Subscriber Network Services (Telnet/Ftp) - Honeywell AlarmNet 7810iR-ent Installation And Setup Manual

7810iR-ent Internet/Intranet Alarm Receiver Installation and Setup Guide

Subscriber Commands

Subscriber Network Services (Telnet/FTP)

Subscriber network services like Telnet & FTP can be enabled or disabled from primary
7810iR-Ent. Subscriber network services cannot be enabled/disabled from secondary
7810iR-Ent. As a part of subscriber details screen, 7810iR-Ent provides user interface to
enable/disable subscriber network services.
UL
ULC
Action
1. To enable/disable subscriber network
services from primary 7810iR-ent, touch
the AlarmNet button.
2. Touch the View Accounts button.
3. Use the keypad to enter the Authorized
Code. The default Authorized Code for
7810iR-ent is: 7810.
4-24
Subscriber network services have not been evaluated by UL.
For ULC installations, subscriber network services like Telnet and FTP shall be disabled.
Screen Display