Section 7: Diagnostics and Troubleshooting
LED Test
Perform the LED Test as follows:
Action
Screen Display
1. Press the Test button associated with the
LED Test. "Please Wait " is displayed (yellow)
in the test status column on the "Diagnostics"
screen while the 4 LEDs light sequentially, left
to right (amber, red, green, green), five times.
At the conclusion of the test, a pop-up
"Confirmation Window" is displayed in the
center of the "Diagnostics" screen.
2. Within the Confirmation Window the
question "Did you see chasing LED pattern?"
is displayed.
If you press the Yes button, a green "Passed."
indication is displayed in the test status
column on the "Diagnostics" screen.
If you press the No button, a red "Failed."
indication is displayed in the test status
column on the "Diagnostics" screen.
7-7