Subscriber Database (Private Lan Only) - Honeywell AlarmNet 7810iR-ent Installation And Setup Manual

Internet/intranet ip alarm receiver
Table of Contents

Advertisement

7810iR-ent Internet/Intranet Alarm Receiver Installation and Setup Guide
Action
3. Re-enter the 10-digit Installation Key for
verification.
If Installation Key entry is verified then
7810iR-ent will automatically return you to
the previous screen.
4. The Recovery Mode button will be lit
green indicating that the 7810iR-ent is
attempting to recover all accounts.
Blinking green indicator in the lower right
corner of the Home Screen indicates
Recovery Mode is active.
Touching the Recovery Mode button will
turn the green indicator off and Recovery
Mode is exited.
NOTE: See the Recovery Mode paragraph in
Section 1 for more information.

Subscriber Database (Private LAN Only)

To delete entire subscriber database use the following procedure.
NOTE: If the Primary CS database is initiated for deletion, the Secondary CS database will
be deleted automatically.
Action
1. Touch the AlarmNet button.
4-16
Screen Display
Screen Display

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents