7810iR-ent Internet/Intranet Alarm Receiver Installation and Setup Guide
Test Alarm
This feature allows 7810iR-ent to force a test alarm to be sent. A subscriber can select to
send test alarm to only primary, to only secondary or to both primary and secondary. If a
secondary 7810iR-ent is not configured then options "Second" and "Both" are unavailable.
UL
Action
1. Select primary, secondary or both and
press Send to force subscriber to send a
test alarm to selected receivers.
A confirmation window is displayed to
indicate a command for the subscriber
Test Alarm has been queued.
NOTE: For a secondary 7810iR-ent, the
Test Alarm feature is disabled.
Subscriber Configuration Commands
Action
The subscriber configuration command
allows the user to change the subscriber's;
Supervision interval, Primary central
station IP address and port number,
Secondary central station IP address and
port number, and Account number.
Upon data entry, range and data format
validation is done before sending new
configuration parameters to the subscriber.
Configuration changes are queued for the
subscriber when "Change Configuration"
button is pressed.
IMPORTANT: You must ensure the validity
of new configuration data before commit-
ting the configuration change.
4-28
Subscriber Test Alarm has not been evaluated by UL.
Screen Display
Screen Display