Physical Interface; Wi-Fi Mini-Pim Hardware Specifications - Juniper SRX300 Series Reference Manual

Table 52: Wi-Fi Mini-PIM Models (continued)
Model or SKU
SRX-MP-WLAN-IL
SRX-MP-WLAN-WW

Physical Interface

The physical interface for the Wi-Fi Mini-PIM uses the name wl-x/0/0, where x is the slot on the services
gateway where the Mini-PIM is installed. You can install the Mini-PIM in any of the Mini-PIM slots on the
services gateway.

Wi-Fi Mini-PIM Hardware Specifications

Table 53 on page 93 provides the hardware specifications for the Mini-PIM.
Table 53: Wi-Fi Mini-PIM Hardware Specifications
Description
Dimensions
Weight
Form factor
Connector type
Environmental operating temperature
Storage temperature
Relative humidity
Operating altitude
Supported Region Notes
Israel This model is based on the wireless standards supported in Israel.
The country code is fixed and cannot be changed.
Other countries You can set the country code using the set wlan access-point
ap-name access-point-options country country code command.
For information on country codes, see
Value
H x W x L:
0.79 in. x 3.70 in. x 5.29 in. (2.0 cm x 9.4 cm x 13.43 cm)
0.29 lb (0.13 kg)
Mini-PIM
RP-SMA
32° F through 104° F (0° C through 40° C)
-40° F through 158° F (-40°C through 70° C)
5% to 90% noncondensing
6,000 feet (1828 meters)
Table 59 on page 100
93