Table 35: Supported Profiles on the 1-Port VDSL2 Annex A (SRX-MP-1VDSL2-R) Mini-PIM (continued)
Profiles
Auto
1-Port VDSL2 Annex A (SRX-MP-1VDSL2-R) Mini-Physical Interface Module
Cable Specifications
The 1-Port VDSL2 (Annex A) Mini-Physical Interface Module (Mini-PIM) requires a standard RJ-11 cable.
Figure 7 on page 60
shows the RJ-11 cable design.
Figure 7: RJ-11 Cable Pinout for 1-Port VDSL2 Annex A (SRX-MP-1VDSL2-R) Mini-PIM
Table 36 on page 60
shows the pin assignments of the RJ-11 cable.
Table 36: RJ-11 Cable Pinout Details for 1-Port VDSL2 Annex A (SRX-MP-1VDSL2-R) Mini-PIM
Pin
A1
A2
A3
A4
Data Rate
Auto mode (default)
Signal
Ground
RX (data input)
Tx (data output)
Vcc (power)
60