8-Port Gigabit Ethernet Sfp Xpim Supported Transceivers - Juniper SRX300 Series Reference Manual

Table 39: 8-Port Gigabit Ethernet SFP XPIM LED States (continued)
LED Color
STATUS Green
Yellow
Red

8-Port Gigabit Ethernet SFP XPIM Supported Transceivers

You can customize the Ethernet interface type by using different 1-port small form-factor pluggable (SFP)
transceivers. Table 40 on page 66
Ethernet SFP modules for XPIMs.
Table 40: 8-Port Gigabit Ethernet SFP XPIM Supported Modules
Juniper Product Number
SRX-SFP-FE-FX
EX-SFP-1FE-FX
SRX-SFP-1GE-LH
EX-SFP-1GE-LH
SRX-SFP-1GE-LX
EX-SFP-1GE-LX
SRX-SFP-1GE-SX
EX-SFP-1GE-SX
SRX-SFP-1GE-T
EX-SFP-1GE-T
EX-SFP-GE10KT13R14
State Description
On The GPIM is functioning normally.
The GPIM is starting up, running diagnostics, or going
offline.
The GPIM has failed.
Off The GPIM is not powered on, is offline, or is not
configured.
lists the SFP transceivers and cables supported on the 8-port Gigabit
Connector Type (SFP Transceiver)
100BASE-FX
1000BASE-LH
1000BASE-LX
1000BASE-SX
1000BASE-T, Copper Transceiver
1000BASE-BX10, at 10 km (TX 1310 nm / RX 1490
nm)
66
Cable
LC
LC
LC
LC
CAT-5e
LC