1-Port Vdsl2 Annex A Mini-Physical Interface Module (Srx-Mp-1Vdsl2-R) Hardware Specifications - Juniper SRX300 Series Reference Manual

The following features are supported on the 1-Port VDSL2 Annex A Mini-Physical Interface Module
(Mini-PIM):
ADSL/ADSL2/ADSL2+ backward compatibility with Annex-A, Annex-M support
Packet Mode Transfer (PTM) or Ethernet in the First Mile (EFM) (802.3ah) support
Operation, Administration, and Maintenance (OAM) support for ADSL/ADSL2/ADSL2+ mode
Asynchronous Transfer Mode (ATM) quality of service (QoS) (supported only when the VDSL2 Mini-PIM
is operating in ADSL2 mode)
Multilink Point-to-Point Protocol (MLPPP) (supported only when the VDSL2 Mini-PIM is operating in
ADSL2 mode)
Support for a maximum of 10 permanent virtual connections (PVCs) (only in ADSL/ADSL2/ADSL2+
mode)
Dying Gasp support (ADSL and VDSL2 mode)
1-Port VDSL2 Annex A Mini-Physical Interface Module (SRX-MP-1VDSL2-R)
Hardware Specifications
Table 33 on page 58 gives the hardware specifications of the 1-Port VDSL2 Annex A Mini-Physical Interface
Module (Mini-PIM).
Table 33: 1-Port VDSL2 Annex A (SRX-MP-1VDSL2-R) Mini-PIM Hardware Specifications
Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
Environmental operating temperature
Storage temperature
Relative humidity
Value
3.75 in. x 5.9 in. x 0.80 in.
(9.5 cm x 14.5 cm x 2.0 cm)
4.0 oz (114 g)
RJ-11
Mini-PIM
32°F through 113°F (0° C through 40° C)
–40°F through 158°F (–40° C through 70° C)
5% to 90% noncondensing
58