Wi-Fi Mini-Physical Interface Module - Juniper SRX300 Series Reference Manual

Wireless Modem Network Info
Current Modem Status: Connected
Current Service Status: Normal
Current Service Type: PS
Current Service Mode: LTE
Current Band: B3
Network: UNICOM
Mobile Country Code (MCC): 460
Mobile Network Code (MNC): 1
Location Area Code (LAC): 65534
Routing Area Code (RAC): 0
Cell Identification: 4865903
Access Point Name (APN): ctnet
Public Land Mobile Network (PLMN): CHN-UNICOM
Physical Cell ID (PCI): 333
International Mobile Subscriber Identification (IMSI): **************
International Mobile Equipment Identification (IMEI/MEID): *************
Integrate Circuit Card Identity (ICCID): 89860114721100697502
Reference Signal Receiving Power (RSRP): -97
Reference Signal Receiving Quality (RSRQ): -16
Signal to Interference-plus-Noise Ratio (SiNR): 0
Signal Noise Ratio (SNR): 0
Energy per Chip to Interference (ECIO): 0

Wi-Fi Mini-Physical Interface Module

IN THIS SECTION
Wi-Fi Mini-Physical Interface Module Overview | 91
Wi-Fi Mini-PIM Hardware Specifications | 93
Channels and Frequencies Supported on the Wi-Fi Mini-PIM | 94
Country Codes and Regulatory Domains | 99
RF Specifications for the Wi-Fi Mini-PIM | 109
Installing the Wi-Fi Mini-PIM in an SRX Series Services Gateway | 111
Configuring the Wi-Fi Mini-PIM on an SRX Series Services Gateway | 113
Verify the Status of the Wi-Fi Mini-PIM | 120
Upgrading the Firmware on the Wi-Fi Mini-PIM | 122
90