16-Port Gigabit Ethernet Xpim (Poe) Components; 16-Port Gigabit Ethernet Xpim (Poe) Hardware Specifications - Juniper SRX300 Series Reference Manual

Maximum module power of 40 W without PoE
JTAG support for boundary scan test

16-Port Gigabit Ethernet XPIM (PoE) Components

The 16-Port Gigabit Ethernet XPIM contains the components listed in
Table 42: 16-Port Gigabit Ethernet XPIM Components
Component
XPIM ONLINE/OFFLINE button
The SRX550 High Memory Services
Gateway does not support
hot-swappable functionality for
GPIMs.
16 PoE ports labeled 0 to 15
Captive screws
Handles

16-Port Gigabit Ethernet XPIM (PoE) Hardware Specifications

Table 43 on page 73 provides the specifications for the 16-Port Gigabit Ethernet XPIM.
Table 43: 16-Port Gigabit Ethernet XPIM Hardware Specifications
Description
Dimensions (H x W x L)
Weight
Location
Right side of the XPIM
Middle of the XPIM
One on each side of the XPIM
One on each side of the XPIM
Value
1.58 in. x 6.72 in. x 8.5 in.
(4.0 cm x 17.1 cm x 21.6 cm)
16.5 oz (0.68 kg)
Table 42 on page 73.
Description
Use the XPIM ONLINE/OFFLINE
button to gracefully shut down the
XPIM.
Each port on the 16-Port Gigabit
Ethernet with PoE XPIM supports
Power over Ethernet (PoE).
Use the captive screws to hold the
XPIM in place in the services
gateway.
Use the handles to grasp the XPIM
for installation or removal.
73