16-Port Gigabit Ethernet Xpim (Poe) Leds - Juniper SRX300 Series Reference Manual

Table 43: 16-Port Gigabit Ethernet XPIM Hardware Specifications (continued)
Description
Connector type
Form factor
Environmental operating temperature
Storage temperature
Relative humidity

16-Port Gigabit Ethernet XPIM (PoE) LEDs

Table 44 on page 74 lists the LEDs on the 16-Port Gigabit Ethernet XPIM.
Table 44: 16-Port Gigabit Ethernet XPIM LED States
LED
STATUS
LINK/ACT
N/A
PoE
Color State
Green On
Yellow On
Red On
Green On
Off
Blinking
N/A N/A
Green On
Off
Blinking
Value
16 RJ-45
Double-high, single-wide XPIM
32° F through 104° F (0° C through 40° C)
-40° F through 158° F (-40° C through 70° C)
5% to 90% noncondensing
Description
XPIM is online and functioning normally.
XPIM is starting up, running diagnostics, or
shutting down.
XPIM has failed.
Port is online.
Port is offline.
Port is receiving or sending data.
Not used on the non-PoE XPIM.
Port is PoE enabled and online.
Port is offline.
Port is PoE enabled and receiving or sending
data.
74