1-Port T1/E1 Mini-Physical Interface Module (SRX-MP-1T1E1-R) Hardware
Specifications
Table 26 on page 48
gives the physical specifications of the 1-Port T1/E1 Mini-Physical Interface Module
(Mini-PIM).
Table 26: 1-Port T1/E1 Mini-PIM (SRX-MP-1T1E1-R) Physical Specifications
Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
Environmental operating temperature
Storage temperature
Relative humidity
1-Port T1/E1 Mini-Physical Interface Module (SRX-MP-1T1E1-R) LEDs
The 1-Port T1/E1 Mini-Physical Interface Module (Mini-PIM) has three LEDs.
the LED states.
Table 27: 1-Port T1/E1 Mini-PIM (SRX-MP-1T1E1-R) LED States
LED
Color
ALARM
Yellow
LOOPBACK
Yellow
Value
0.80 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm )
2.88 oz (82 g)
RJ-48
Mini-PIM
32°F through 104°F (0°C through 40°C)
–40°F through 158°F (–40°C through 70°C)
5% to 90% noncondensing
State
Description
On
Indicates that there is a local or remote alarm; device
has detected a failure.
Off
Indicates that there are no alarms or failures.
On
Indicates that a loopback or line state is detected.
Off
Indicates that the loopback is not active.
Table 27 on page 48
describes
48