Srx300 Series And Srx550 High Memory Services Gateway Gigabit-Backplane Physical Interface Modules Overview - Juniper SRX300 Series Reference Manual

Table 3: SRX300 Series and SRX550 High Memory Services Gateway Mini-PIM Model Numbers
Mini-PIMs
Serial Mini-PIM
T1/E1 Mini-PIM
VDSL2 Mini-PIM
LTE Mini-PIM
Wi-Fi Mini-PIM
The Mini-PIMs are field-replaceable. You can install a Mini-PIM in the Mini-PIM slot on the front panel of
the services gateway chassis.
CAUTION:
gateway before removing or installing Mini-PIMs.
SRX300 Series and SRX550 High Memory Services Gateway
Gigabit-Backplane Physical Interface Modules Overview
A Gigabit-Backplane Physical Interface Module (GPIM) is a network interface card (NIC) that installs in the
front slots of the SRX550 High Memory Services Gateway to provide physical connections to a LAN or a
WAN. The GPIM receives incoming packets from a network and transmits outgoing packets to a network.
These modules complement the onboard Ethernet interfaces to extend the types and port counts of
network connections for the LAN or WAN.
Interface module terminology:
GPIM—Can be installed in one of the single-high, single-wide GPIM front slots of the SRX550 High
Memory Services Gateway that have Gigabit connectivity to the system backplane.
Model Numbers
SRX-MP-1Serial-R
SRX-MP-1T1E1-R
SRX-MP-1VDSL2-R
SRX-MP-LTE-AE (for North America and the European Union)
SRX-MP-LTE-AA (for Asia and Australia)
SRX-MP-WLAN-US (for United States)
SRX-MP-WLAN-IL (for Israel)
SRX-MP-WLAN-WW (for other countries)
The Mini-PIMs are not hot-swappable. You must power off the services
20