Appendix; Circuitless Ip (Clip) Cli; Ospf Brouter Port Cli; Ospf Network Cli - Avaya 8600 Engineering

10. Appendix

The following CLI strings are intended to be used in a cut and paste manner to facilitate Ethernet Routing
Switch 8600 OSPF configurations. Please reference the associated figure and configuration notes in that
section then use the Acrobat "Text Select Tool" to copy the commands and paste in a provisioning
window, edit associated parameters as required.
10.1

Circuitless IP (CLIP) CLI

Reference Section 2 (page 4):
config ip circuitless-ip-int X create <ipaddress/mask>
config ip circuitless-ip-int X ospf enable
config ip ospf admin-state enable
config ip ospf router-id <CLIP IP Address>
config ip ospf enable
10.2

OSPF Brouter Port CLI

Reference Figure 1 (page 5) and the configuration tables on page 5:
config ethernet 2/1 ip create 10.1.1.21/30 2134
config ethernet 2/1 ip ospf enable
config vlan 2 create byport 1
config vlan 2 ports add 1/2
config vlan 2 ip create 172.3.1.1/24
config vlan 2 ip ospf enable
config ip circuitless-ip-int 1 create 1.1.1.1/32
config ip circuitless-ip-int 1 ospf enable
config ip ospf router-id 1.1.1.1
config ip ospf enable
10.3

OSPF Network CLI

Reference Figure 2 (page 6) and the configuration tables on page 6:
config vlan 2 create byport 1
config vlan 2 ports add 1/2
config vlan 2 ip create 172.3.1.1/24
config vlan 2 ip ospf interface-type passive
config vlan 2 ip ospf enable
November 2010
ERS 8600 / 8800 OSPF Technical Configuration Guide
avaya.com
45