Roles And Permissions Panel - Extron electronics ISS 608 User Manual

Roles and Permissions Panel

The Roles and Permissions panel (see figure 41,
Admin and User passwords have been set. It does not display the actual password.
NOTE: The following rules apply to passwords:
• Length is 1-128 characters.
• All human-readable characters are permitted except |.
The password cannot be a single space.
•
• Passwords are case-sensitive.
The factory configured passwords for all accounts on this device have been set
•
to the device serial number. In the event of a complete system reset, the Admin
password converts to the default, which is extron, and the User is cleared.
To assign a administrator and user passwords:
In the Roles and Permissions panel,
1.
click EDIT (see figure 51). The Role and
Permission Settings dialog box opens.
2. In the Admin panel, click the Change
Admin Password link and enter the new
administrator password in the field below
(see figure 52).
3. Click in the Confirm Admin Password
field and enter the password from the
Change Admin Password field.
4. To assign a user password, repeat
steps 2 and 3 in the User panel.
5. When finished, click SAVE to
set the passwords. To close
the window without saving a
password, click CANCEL or the X in
the upper-right corner.
To reset an assigned password:
1. In the Change Admin Password or
Change User Password field, enter
a single space.
2. Enter a single space in the
appropriate Confirm Password
field.
3. Click SAVE.
Figure 51.
Figure 52.
ISS 608 and ISS 612 Seamless Switchers • Internal Web Page
on page 70) displays whether
8
Roles and Permissions
Panel
Passwords Dialog Box
75