Stapling And Hole Punching - Toshiba e-STUDIO 281C Printing Manual

NOTE: This is only available for PCL5c printer driver and PS3 printer driver.
Printing a color document in gray scale
1.
2.
3.

— Stapling and Hole Punching

You can staple and punch the paper.
NOTES: •
•
Stapling the paper
1.
NOTES: •
•
2.
3.
Printing Guide — Printing from Windows
Display the Setup tab and select "Mono" at the "Color" drop
down box.
Set other print options you require and click [OK].
Click [OK] or [Print] to send a print job.
• The print job is printed in gray scale.
Stapling is not available if a finisher is not installed.
Hole Punching is not available if a hole punch unit is not installed.
Display the Setup tab and select how to staple at the "Staple"
drop down box.
Upper Left — Select this to staple the printed document in the upper left.
Center Top — Select this to staple the printed document double in the upper
side.
Upper Right — Select this to staple the printed document in the upper right.
Middle Left — Select this to staple the printed document double in the left.
Center Double — Select this to fold and staple the printed document double in
the center.
The selectable options vary depending on the paper size.
"Center Top" can be selected only when the Saddle-stitch Finisher is installed and
configured on the Configuration tab.
Set other print options you require and click [OK].
Click [OK] or [Print] to send a print job.
• The output is stapled for each copy.
3. Printing
247