Bridge Kit; Finisher And Hole Punch Unit - Toshiba e-Studio2505AC Hardware Troubleshooting Manual
E-studio5005ac series;
e-studio5008a series.
multifunctional digital colog system /
multifunctional digital systems.
Hide thumbs
Also See for e-Studio2505AC:
- Printing manual (174 pages) ,
- Software installation manual (164 pages) ,
- Copying manual (132 pages)
Table of Contents
Advertisement
1.TROUBLESHOOTING FOR THE HARDWARE
Bridge Kit
Open the cover holding the handle of the Bridge Kit.
1
Remove the misfed paper inside the Bridge Unit.
2
If the misfed paper cannot be removed because the right side is caught by the fuser unit, follow the steps on
P.35 "Fuser unit".
Close the Bridge Kit cover.
3
Finisher and Hole Punch Unit
Paper misfeed in the upper receiving tray
1
Raise the lever and open the upper receiving tray of the finisher.
Remove the misfed paper.
2
Clearing a Paper Misfeed 39
Hide quick links:
Advertisement
Table of Contents
