Configuration Tab - Toshiba e-STUDIO 281C Printing Manual

2) Substitution Table Edit
3) [Run Font Manager]
NOTE: The [Run Font Manager] button is not displayed for the PCL6 or PCL5c printer driver.

— Configuration Tab

The Configuration Tab allows you to configure options. When any optional unit is
installed in this equipment, set the configuration of the machine on this tab.
1) Pedestal
NOTE: LCF is not available for some countries or regions.
2) Finisher
Printing Guide — Printing from Windows
This table shows how each TrueType font is substituted. You can edit the substitu-
tion setting for each TrueType font. In this table, the TrueType font names are dis-
played in the TrueType Font column, and how the TrueType font is printed is shown
in the Use Printer Font column.
To edit the substitution table, select the TrueType font that you want to edit from the
table, and select how the TrueType font is printed at the Printer Font For drop down
box.
At the Printer Font For drop down box, you can select "Download as Soft Font" to
send the TrueType fonts in Type 42 format, or other available printer fonts to be sub-
stituted. The printer fonts displayed in the drop down box differ depending on the
TrueType fonts.
Click this to run the Agfa Font Manager. This is not available if the Agfa Font Man-
ager is not installed.
This sets whether or not the optional pedestals or large capacity feeder is installed.
- None — Select this when neither drawer nor large capacity is installed.
- Large Capacity Feeder — Select this when the Large Capacity Feeder is
installed.
- Drawer3 — Select this when 3rd drawer is installed.
- Drawer3 & Drawer4 — Select this when 3rd drawer and 4th drawer are
installed.
This sets whether or not the optional finisher is installed.
- None — Select this when finisher is not installed.
- Hanging Finisher — Select this when the Hanging Finisher is installed.
3. Printing
1
2
3
4
5
6
7
8
9
10
11
12
13
237